Belkin F5D6050: "phy1: at76_wait_completion failed: 7"

Linux howto's, compile information, information on whatever we learned on working with linux, MACOs and - of course - Products of the big evil....
Post Reply
User avatar
^rooker
Site Admin
Posts: 1483
Joined: Fri Aug 29, 2003 8:39 pm

Belkin F5D6050: "phy1: at76_wait_completion failed: 7"

Post by ^rooker »

[PROBLEM]
Trying to use my old Belkin F5D6050 with Xubuntu Precise Pangolin (12.04 LTS).

I've manually copied the firmware binary blobs for at76c503a chipset to /lib/firmware.
When plugging in the Belkin USB adaptor, the right goes orange - and after a few seconds, it flickers green/orange.
Looks good.

It shows up as "wlan0", and already lists wireless networks in the area. So it seems to be working.
Somewhat.

Now, trying to connect to a network turns the flickering-green light on the Belkin back to orange.
Connection fails.

In "dmesg" output, lines like this keep repeating:
[ 8879.664471] ieee80211 phy2: at76_wait_completion failed: 7
Hm... Maybe this old adaptor isn't able to connect to a WPA/WPA2 protected WiFi network?
:?

To be continued...

Links:
Jumping out of an airplane is not a basic instinct. Neither is breathing underwater. But put the two together and you're traveling through space!
Top
Post Reply

Return to “Knowledge Base”